How GLEN ensure Fenders Quality?

GLEN’s fenders are manufactured from high quality nature rubber and other styrene butadiene SBR based compounds.

*GLEN shall test raw material for each batch of fenders including: Tensile strength, elongation at break, compression set ( 70℃，22h,25%), hardness ( shore A), tear resistance Die B, ozone aging ( 40℃, 48h,20%50pphm), and hot air aging.
*GLEN’s fenders shall be tested in accordance with the requirements of PIANC’s “Guidelines for the Design of Fender Systems: 2002” and ASTM F2192-05 “Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders”

*Performance verification testing is to be undertaken on the fenders units supplied. All fenders shall be fully pre-compressed at least once prior to installation.
*Fender chains’ safety factor is 2~3 times of working load.
*Fender mounting fixings, structural steel and chains are well painted. Mounting fixings and chains are painted by H.D.G with min. thickness 0.075μm, and the panel is painted by TSA or TSZ to increase anti-corrosion.
*Each fender has a tracking No. for manufacturing & testing records.
*All GLEN’s fenders have one year warranty calculated from the shipping date.
*3rd party inspection party LR is GLEN’s long-term cooperation partner. LR certification is to be supplied for each batch of fenders supplied.

评论

发表评论

此博客中的热门博文

Loading Arm INSPECTION AND TESTING

图片
The factory tests shall be demonstrate the following: •  Specification compliance checks. •  Complete hydraulic power system; •  Control and alarm systems; •  Operating times of the QC/DC; •  Safe operating of the loading arm; •  Operation of the various interlock; •  Operation of the control panel and the pendant; •  Operating envelope at jetty level;
阅读全文

Cylindrical Fender

Cylindrical  Fenders  are commonly used fenders recommendedfor all type of applications to ensure a safeand linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or peciallydesigned ladder brackets.
阅读全文

Berthing Approach System(BAS)

The Berthing Approach System (BAS) is used for safe berthing of vessels by measuring the distance, speed and angle of the ship’s bow and stern section in relation to the berth fenders and triggers alarms during the final sideways berthing phase. The BAS comprise the systems to determine a vessels bow and stern approach velocity and display this information on an LED Display, handheld pagers and within the Shore Control Centre. ► The BAS consist of the following components:   ◎ 2 No. lasers   ◎  1 No. large Numeric LED Display   ◎ 2 No. handheld Pagers ► Lasers The lasers shall have the following minimum specifications as listed in Table 9. Criteria Design value Laser Range 0 to 300 [m]. Measuring Distance Accuracy ± 2 [mm] at 0 – 300 [m] Computer Display Distance Resolution ± 1 [mm] at 0 – 300 [m] Large Display Distance Resolution ± 0.5 [m] at 0 – 300 [m] Velocity Range 0 – 99 [cm/s] Measuring Velocity Accuracy ± 0...
阅读全文