Tee Head Bollard

Tee Head Bollard Features:

Suitable for a steeper rope
angles Capacity from 10ton to 200ton
Custom design is available

Drawing & Dimension














Product Photo

评论

发表评论

此博客中的热门博文

Loading Arm INSPECTION AND TESTING

图片
The factory tests shall be demonstrate the following: •  Specification compliance checks. •  Complete hydraulic power system; •  Control and alarm systems; •  Operating times of the QC/DC; •  Safe operating of the loading arm; •  Operation of the various interlock; •  Operation of the control panel and the pendant; •  Operating envelope at jetty level;
阅读全文

Cylindrical Fender

Cylindrical  Fenders  are commonly used fenders recommendedfor all type of applications to ensure a safeand linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or peciallydesigned ladder brackets.
阅读全文

Berthing Approach System(BAS)

The Berthing Approach System (BAS) is used for safe berthing of vessels by measuring the distance, speed and angle of the ship’s bow and stern section in relation to the berth fenders and triggers alarms during the final sideways berthing phase. The BAS comprise the systems to determine a vessels bow and stern approach velocity and display this information on an LED Display, handheld pagers and within the Shore Control Centre. ► The BAS consist of the following components:   ◎ 2 No. lasers   ◎  1 No. large Numeric LED Display   ◎ 2 No. handheld Pagers ► Lasers The lasers shall have the following minimum specifications as listed in Table 9. Criteria Design value Laser Range 0 to 300 [m]. Measuring Distance Accuracy ± 2 [mm] at 0 – 300 [m] Computer Display Distance Resolution ± 1 [mm] at 0 – 300 [m] Large Display Distance Resolution ± 0.5 [m] at 0 – 300 [m] Velocity Range 0 – 99 [cm/s] Measuring Velocity Accuracy ± 0...
阅读全文