Hanging Type Filling Arm (With Hose)

This type of filling arm makes liquid phase and gas phase pipeline be concentrated in folding arm of the hose crane, adopt hose at the end to connect the boat needed to be filled and has a pull off valve. Advantages: with a lifting function; can use the hose crane hoisting and unloading drum etc..; electro hydraulic control; be suitable for irregular modified cargo ship to fill LNG fuel.
STANDARDS
OCIMF
Design and construction specification for marine loading arm
ASME Section VIII
Rules for construction of pressure vessel-Division 1
ASME Section IX
Welding and brazing qualification
ASME Section V
Non-destructive examination
ASME B16.5
Pipe flanges and flanged fittings NPS ½ through NPS 24 metric/inch standard
ASME B31.3
Process piping
ASME B16.25
Butt welding ends.
BS 6349
Maritime works.  General. Code  of practice  for geotechnical design
IEC 60034
Rotating electrical machines
IEC 60079
Explosive atmospheres
IEC 60085
Electrical Insulation
IEC 60529
Degrees of Protection by Enclosures (IP code)
IEC 60947
Low-voltage switchgear and control gear
IEC 61000
Electromagnetic compatibility (EMC).
IEC 61511
Functional safety: Safety instrumented systems for the process industry sector

评论

发表评论

此博客中的热门博文

Loading Arm INSPECTION AND TESTING

图片
The factory tests shall be demonstrate the following: •  Specification compliance checks. •  Complete hydraulic power system; •  Control and alarm systems; •  Operating times of the QC/DC; •  Safe operating of the loading arm; •  Operation of the various interlock; •  Operation of the control panel and the pendant; •  Operating envelope at jetty level;
阅读全文

Cylindrical Fender

Cylindrical  Fenders  are commonly used fenders recommendedfor all type of applications to ensure a safeand linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or peciallydesigned ladder brackets.
阅读全文

Berthing Approach System(BAS)

The Berthing Approach System (BAS) is used for safe berthing of vessels by measuring the distance, speed and angle of the ship’s bow and stern section in relation to the berth fenders and triggers alarms during the final sideways berthing phase. The BAS comprise the systems to determine a vessels bow and stern approach velocity and display this information on an LED Display, handheld pagers and within the Shore Control Centre. ► The BAS consist of the following components:   ◎ 2 No. lasers   ◎  1 No. large Numeric LED Display   ◎ 2 No. handheld Pagers ► Lasers The lasers shall have the following minimum specifications as listed in Table 9. Criteria Design value Laser Range 0 to 300 [m]. Measuring Distance Accuracy ± 2 [mm] at 0 – 300 [m] Computer Display Distance Resolution ± 1 [mm] at 0 – 300 [m] Large Display Distance Resolution ± 0.5 [m] at 0 – 300 [m] Velocity Range 0 – 99 [cm/s] Measuring Velocity Accuracy ± 0...
阅读全文