Hook Capstan

Glen capstan equipped with rope guides to assist in leading to the messenger lines to the capstan head. It can greatly reduce the handling time of the linesmen needed for mooring. They prevent heavy lifting of mooring lines.

Specifications
Criteria
 Design value
Starting pull
30kN
Running Pull
15kN
Drum speed
25rpm
Line Speed
0.4m/s

How to ensure capstan running efficient , simple operation and safety
►Local Starter Motor Each capstan executed with local reversible & space-heater motor-starter
►Ingress Protection IP 65 protected for electric motors, motor-starters and foot witches
►Insulation:The complete capstan and motor-starter have electrically insulated from the mooring units
►Certification All electrical equipment ATEX certified for use in Zone 1 Hazardous Areas
►Maintenance free Lubricated for life


评论

发表评论

此博客中的热门博文

Loading Arm INSPECTION AND TESTING

图片
The factory tests shall be demonstrate the following: •  Specification compliance checks. •  Complete hydraulic power system; •  Control and alarm systems; •  Operating times of the QC/DC; •  Safe operating of the loading arm; •  Operation of the various interlock; •  Operation of the control panel and the pendant; •  Operating envelope at jetty level;
阅读全文

Cylindrical Fender

Cylindrical  Fenders  are commonly used fenders recommendedfor all type of applications to ensure a safeand linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or peciallydesigned ladder brackets.
阅读全文

Berthing Approach System(BAS)

The Berthing Approach System (BAS) is used for safe berthing of vessels by measuring the distance, speed and angle of the ship’s bow and stern section in relation to the berth fenders and triggers alarms during the final sideways berthing phase. The BAS comprise the systems to determine a vessels bow and stern approach velocity and display this information on an LED Display, handheld pagers and within the Shore Control Centre. ► The BAS consist of the following components:   ◎ 2 No. lasers   ◎  1 No. large Numeric LED Display   ◎ 2 No. handheld Pagers ► Lasers The lasers shall have the following minimum specifications as listed in Table 9. Criteria Design value Laser Range 0 to 300 [m]. Measuring Distance Accuracy ± 2 [mm] at 0 – 300 [m] Computer Display Distance Resolution ± 1 [mm] at 0 – 300 [m] Large Display Distance Resolution ± 0.5 [m] at 0 – 300 [m] Velocity Range 0 – 99 [cm/s] Measuring Velocity Accuracy ± 0...
阅读全文