QRH Mooring Load Monitoring system(MLMS)

Glen hooks provide load read out with continuous remote load recording, This allows the shore facility to warn the vessel crew when high mooring line loads are being experienced. It design to provide continuous, automatic monitoring and recording of the mooring line loads applied at each hook. The system shall include all equipment, power and control cables, amplfiers, junction boxes, power supplies, electronic data processing equipment etc. As required to monitor the line loads and transmit the data back to the Shore Control Centre.

GLEN MLMS accuracy and safety 

►Load Measuring Pins Each mooring hook equip with load measuring pin installed into the hook at the place of horizontal hook pin. Each load measuring pin calibrated up to the proof load during the hook load-test.
 Load measuring pins have the minimum specifications
Criteria
Design value
Proof Load
Min150% of hook safe working load
Accuracy
+/-2% of the full load
IP rating
IP67
Output
M V/V
Source Voltage
6V

►Certification All Load pins ATEX certified for use in Zone 1 Hazardous Areas.
►Alarms Audible and visual alarm functions shall be provided in the shore Control Centre and at each mooring hook installation to warn of high line loads and imbalance between mooring lines
►Central Computer system All MLMS data and alarms shown on a central computer system located in the Shore Control Centre and running Integrated Mooring System software.





评论

发表评论

此博客中的热门博文

Loading Arm INSPECTION AND TESTING

图片
The factory tests shall be demonstrate the following: •  Specification compliance checks. •  Complete hydraulic power system; •  Control and alarm systems; •  Operating times of the QC/DC; •  Safe operating of the loading arm; •  Operation of the various interlock; •  Operation of the control panel and the pendant; •  Operating envelope at jetty level;
阅读全文

Cylindrical Fender

Cylindrical  Fenders  are commonly used fenders recommendedfor all type of applications to ensure a safeand linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or peciallydesigned ladder brackets.
阅读全文

Berthing Approach System(BAS)

The Berthing Approach System (BAS) is used for safe berthing of vessels by measuring the distance, speed and angle of the ship’s bow and stern section in relation to the berth fenders and triggers alarms during the final sideways berthing phase. The BAS comprise the systems to determine a vessels bow and stern approach velocity and display this information on an LED Display, handheld pagers and within the Shore Control Centre. ► The BAS consist of the following components:   ◎ 2 No. lasers   ◎  1 No. large Numeric LED Display   ◎ 2 No. handheld Pagers ► Lasers The lasers shall have the following minimum specifications as listed in Table 9. Criteria Design value Laser Range 0 to 300 [m]. Measuring Distance Accuracy ± 2 [mm] at 0 – 300 [m] Computer Display Distance Resolution ± 1 [mm] at 0 – 300 [m] Large Display Distance Resolution ± 0.5 [m] at 0 – 300 [m] Velocity Range 0 – 99 [cm/s] Measuring Velocity Accuracy ± 0...
阅读全文